Simple. Fast. Easy Installation.

For screeded Floor Types

Product Description

Why OgeeBoard?

  • Simple installation compared to traditional screed systems
  • High grade insulation panel
  • Reduces screed volume for faster installation
  • No other fixings or staples needed


OgeeBoard saves screed and protects the pipe.

OgeeBoard for screed underfloor heating is manufactured from XPS polystyrene insulation. The polystyrene boards are routed with channels into which the pipe is installed and a screed is laid over. The OgeeBoard insulation panels are designed to hold the pipe within the thickness of the insulation reducing the possibility of damage from site traffic. No other fixings, staples or plates are needed to hold the underfloor heating pipe in place. The OgeeBoard insulation panels are available from 35mm.


Use OgeeBoard in your next project


Last Updated: 19th July 2017

OMNIE OgeeBoard XPS extruded insulation panels using 16.5mm PE-RT pipe to DIN 4726. Expansion foam to be installed around the perimeter of the room. The OgeeBoards are 35/50/75mm thick for a 65mm screed to be laid over. The system is to be designed, installed and commissioned to BS1264.

Panel thickness
35mm, 50mm, 75mm

Panel Dimensions
2400 x 600mm

16.5mm PE-RT to DIN 4726

Pipe Centres

Standard sand/cement screed of 65/75mm or a specialist thinner anhydrite or liquid screed (confirmation of thickness land prep to be sought by screed supplier).


Floor Finish

Flow and Return Water Temperature (°C)





Tile Finish (0.01m²K/W)

150 W/m²

126 W/m²

102 W/m²

78 W/m²

15mm Wood Finish (0.1m²K/W)

105 W/m²

88 W/m²

71 W/m²

54 W/m²

Carpet & Underlay (0.15 m²K/W)

88 W/m²

74 W/m²

60 W/m²

46 W/m²

Based on 16.5mm PE-RT pipe at 150mm centres with 65mm sand/cement screed laid over. Air Temperature = 20°C. 0.15 m²K/W = 1.5 TOG.

Heat outputs are dependent on the water temperature, floor construction, system dimensioning, floor finish & design conditions. Contact us for advice and information.

Related Products