×

Simple. Easy. Flexible.

For screeded Floor Types

Product Description


Why ClipPlate?

  • Simple installation compared to traditional screed systems
  • Protects pipe from site traffic and floating in screed
  • Available with pre-attached insulation
  • Interlocking panels with multi-directional channels

Simple Installation Without Staples

ClipPlate panel has been purposely designed to avoid using fixings and staples in the floor and to speed up the installation of underfloor heating systems. ClipPlates are a series of interlocking sheets with an integrated 10mm expanded polystyrene insulation layer. The castellations in the panel provide grip for the pipe, whilst also providing protection from site traffic before and while the screed is being laid.

ClipPlate can be installed over any sub-floor. Where floor build-up is limited, ClipPlate 11 can be used which features integrated 10mm EPS provides some resistance when the product is laid over an insulated floor. The panel is designed to allow pipes to be installed at spacing’s as close as 50mm and at 45° & 90° bends, providing additional flexibility.

Use ClipPlate 11 in your next project

Specifications

Last Updated: 10th August 2017

ClipPlate 11

Specification
OMNIE ClipPlate-11 system using 16.5mm PE-RT pipe to DIN 4726 inserted into overlapping ClipPlates with 10mm pre-bonded EPS. Expansion foam to be installed around the perimeter of the room. The system to be designed, installed and commissioned to BS1264.

Panel Thickness
29mm (Including 10mm EPS pre-bonded insulation – K=0.038 W/mK)

Panel Dimensions
1000mm x 1000mm

Weight
1.2 kg/m2 + Screed

Pipe Centres
150mm

Pipe
16.5mm PE-RT to DIN 4726

Screed
Standard sand/cement screed of 65/75mm or a specialist thinner anhydrite or liquid screed (confirmation of thickness to be sought by screed supplier).

 


ClipPlate 0

Specification
OMNIE ClipPlate 0 system using 16.5mm PE-RT pipe to DIN 4726 inserted into overlapping ClipPlates laid above insulation. Expansion foam to be installed around the perimeter of the room. The system to be designed, installed and commissioned to BS1264.

Panel Thickness
20mm

Panel Dimensions
1450mm x 950mm

Weight
1.1 kg/m2 + Screed

Pipe Centres
150mm

Pipe
16.5mm PE-RT to DIN 4726

Screed
Standard sand/cement screed of 65/75mm or a specialist thinner anhydrite or liquid screed (confirmation of thickness to be sought by screed supplier).

ClipPlate 11 and ClipPlate 0

Floor Finish

Flow and Return Water Temperature (°C)

55/48

50/43

45/38

40/33

Tile Finish (0.01m²K/W)

150 W/m²

126 W/m²

102 W/m²

78 W/m²

15mm Wood Finish (0.1m²K/W)

105 W/m²

88 W/m²

71 W/m²

54 W/m²

Carpet & Underlay

88 W/m²

74 W/m²

60 W/m²

46 W/m²

Based on 16.5mm PE-RT pipe at 150mm centres with 65mm sand/cement screed laid over. Air Temperature = 20°C. 0.15 m²K/W = 1.5 TOG.

Heat outputs are dependent on the water temperature, floor construction, system dimensioning, floor finish & design conditions. Contact us for advice and information.

Delivery

ClipPlate qualifies for OMNIE’s rapid delivery service. For orders under 150m2 which are received (and bill of materials approved by you) before midday, your products will be with you the very next working morning. Click here for more details.

Related Products